
|
DESCRIPTION The AR-153 loudspeaker is a trapezoidal,full range 3-wayLoudspeaker.The loudspeaker for biamping with built-in passive low-loss crossover for the mid/high frequency section. MF/HF section used a 6.5" mid frequency cone driver with a 2" voice coil, and a 1" exit compression driver with a 1.25" voice coil and titanium diaphragm; LF section used a 15" mid frequency cone driver with a 3" voice coil, front loaded. The nominal 80° x 50° dispersion. Two steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet.The enclosure is constructed from 3/4"(18mm) birch plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black semi-matt textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for loop in and loop out connections to additional enclosure.
|
| |
FEATURES:
- Trapezoidal cabinet
- Narrow dispersion
- High SPL
- Rigging tracks
APPLICATIONS
- FOH suitable
- for array configuration
- Mid-scale and small theater
- Stage Sidefill Monitor
- Club and Disco
- Multifunction Hall
- FREQUENCY RESPONSE : 50Hz~ 20KHz(±3dB)/ 30Hz~ 22KHz(-10dB)
- SENSITIVITY (1W/1m) : HF: 103dB(500Hz~ 20KHz),LF: 98dB(50Hz~ 500Hz)
- NOMINAL IMPEDANCE : HI-MID: 16 Ohm/LOW: 8 Ohm
- POWER RATING : HI-MID/LOW: 200/400W(AES)
- CROSSOVER FREQUENCY : HI-MID/MID-LOW: 3KHz/500Hz
- LF COMPONENTS : 1 x 15″woofer(3″voice coil)
- MF COMPONENTS : 1 x 6.5″horn-loaded(2″voice coil)
- HF COMPONENTS : 1 x 2″exit compression driver(3″voice coil) horn loaded
- NOMINAL COVERAGE : 80°(H) x 50°(V)
- CALCULATED OUTPUT (MAX) : HF: 126dB SPL, 132dB SPL peak , HF: 124dB SPL, 130dB SPL peak
- DIMENSIONS (HxWxD) : 780 x 450 x 440(mm)
- NET WEIGHTS : 47(kg)
- CONNECTORS : 2 NeutrikNL4MP connectors
- SUSPENSION HARDWARE : Flying hardware set (rear,bottom,top)
|
| |
 
 
 
 
Chick here for technical note AR-153 |
|
|
|
|