DESCRIPTION


The AR-115/45 loudspeaker is a trapezoidal ,full range 2-way Loudspeaker.The loudspeaker complement consists of a front loaded 15″low-mid frequency cone driver and a 2″exit compression driver with a 3" voice coil and titanium diaphragm on a 45°x 45°HF waveguide. For biamping. Two steel handles are provided for easy lifting and carrying and four rubber feet are fitted to the bottom of the cabinet. The enclosure is constructed from 3/4″(18mm) birch plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black semi-matt textured environmental friendly paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for loop in and loop out connectionsto additional enclosures.

 
  FEATURES
  1. Trapezoidal cabinet
  2. Narrow dispersion
  3. High SPL
  4. Rigging tracks

 

APPLICATIONS

  1. FOH suitable
  2. for array configuration
  3. Mid and smalltheater
  4. Stage Sidefill Monitor
  5. Club and Disco
  6. Multifunction Hall

 

  • FREQUENCY RESPONSE : 50Hz~ 20KHz(±3dB)/ 35Hz~ 22KHz(-10dB)
  • SENSITIVITY (1W/1m) : HF: 110dB(1.5KHz~ 20KHz),LF: 98dB(50Hz~ 1.5KHz)
  • NOMINAL IMPEDANCE : HF/LF: 8/8 Ohm
  • POWER RATING : HF/LF: 150/400W(AES)
  • CROSSOVER FREQUENCY : 1.5KHz
  • LF COMPONENTS : 1 x 15″woofer(3″voice coil)
  • HF COMPONENTS : 1 x 2″exit compression driver(3″voice coil)
  • NOMINAL COVERAGE : 45°(H) x 45°(V)
  • CALCULATED OUTPUT (MAX) : HF: 132dB SPL, 138dB SPL peak,HF: 124dB SPL, 130dB SPL peak
  • DIMENSIONS (HxWxD) : 750 x 450 x 440(mm)
  • NET WEIGHTS : 39(kg)
  • CONNECTORS : 2 NeutrikNL4MP connectors
  • SUSPENSION HARDWARE : Flying hardware set (rear,bottom,top)

 
 

 

 

 

Chick here for technical note AR-115/45